Floor Mats
Custom-fit floor mats and liners that trap Valley mud, sand and spilled drinks before they ever reach your carpet.
Floor Mats at a glance
- Types
- Rubber · deep tray · carpet
- Materials
- Rubber, TPE, carpet, vinyl
- Cost range
- $60–$260
- Fitment
- Year · cab · trim
Floor mats cut to your cab
Floor mats are the first line of defense for your truck's interior: they catch the mud, sand, spilled coffee and salty beach grit that would otherwise grind into the carpet and stay there. The universal mats sold everywhere slide, curl and leave the edges of the carpet exposed, so we stock custom-fit mats and liners cut to the exact floor pan of your cab, including the hump, the dead pedal and the console cutout. It is a small upgrade that keeps a work truck looking sharp and protects resale value mile after mile.
- Custom-fit sets for your exact cab and console
- Rubber, carpet and deep-tray liner options
- Cut for the dead pedal, hump and seat tracks
Why custom mats beat universal ones
A universal mat is a rectangle with a trim line, and it never quite matches your truck's floor. That mismatch is where the damage starts: sand collects at the exposed edges, mats slide under the pedals and carpet stains spread where the mat never reached. A custom mat is molded or cut to your floor pan with raised edges and hooks, so it stays put and holds everything until you pull it out and dump it. For a truck that works for a living, that difference is the whole point.
Rubber, liner and carpet materials
Materials decide how a mat handles mud, water and wear. All-weather rubber is the workhorse, deep-tray liners hold the most liquid, and carpet mats look the closest to factory while they soak up spills. Pick by the mess you actually make, not by what looks best in a catalog photo.
| Type | Material | Best for | Cleaning |
|---|---|---|---|
| All-weather rubber | Vulcanized or molded rubber | Mud, work boots and daily abuse | Hose off, no scrubbing |
| Deep-tray liner | Rigid molded polymer | Spills, snow, heavy liquid | Pull out and dump |
| Custom carpet | Tufted nylon or poly | A factory look and quiet cab | Vacuum and spot clean |
| Vinyl overlay | Textured vinyl | Fleet trucks and easy cleanup | Wipe or hose off |
Mats for work, family and ranch trucks
A welder tracks in metal dust and grease, so a rubber or vinyl mat that hoses clean is ideal. A family truck sees juice boxes, pet hair and beach sand, and a deep-tray liner that contains liquid saves the carpet every summer. A ranch truck that goes from caliche to cab needs a mat with tall edges and a firm grip so it does not creep. A show-truck owner may want custom carpet that matches the interior. Tell us who rides and what they drag in, and we set the right material.
Fitment by cab and console
Floor mat fitment is all about the cab and the console. A regular cab, extended cab and crew cab each have a different front and rear floor, and a truck with a full center console takes different mats than one with a bench seat and a fold-down armrest. Four-wheel-drive trucks often have a different floor hump than two-wheel-drive, and some trims add footwell lighting that trims route around. We match the mat set to your cab, drive type and console so every edge lands where it should.
- Cab size sets the front and rear floor shape
- Full console and bench seats take different cuts
- Two- and four-wheel-drive humps differ
- We account for footwell lighting and subwoofers
What floor mats cost
Floor mat pricing tracks material and coverage, and it moves with cab size and whether you want front and rear or front only. As a working range, all-weather rubber sets commonly run $80–$180, custom carpet sets about $100–$220, deep-tray liners $120–$260 and heavy-duty vinyl fleet mats $60–$150. A full front-and-rear custom set for a crew cab sits at the top of those bands. Count these as ranges, not quotes: the price varies by year, make and trim and by the number of rows you cover.
- All-weather rubber set: typically
- $80–$180
- Custom carpet set: typically
- $100–$220
- Deep-tray liners: typically
- $120–$260
- Heavy-duty vinyl fleet mats: typically
- $60–$150
How mats go in
Floor mats are the easiest upgrade we do, but they still have to be fitted right. We pull the old mats, vacuum the carpet and check for damp spots, then set the new mats so the retention hooks or clips lock into the factory anchors. Tray liners get their edges worked under the trim and around the console so they do not curl, and we make sure nothing sits close to the pedals. It takes minutes, and you leave with mats that stay flat and do their job from the first mile.
-
Old mats out, carpet vacuumed and checked
-
Retention hooks locked into factory anchors
-
Tray edges tucked under trim and console
-
Pedal clearance verified before handoff
Care and mat lifespan
Good mats last for years if you clean them instead of letting grit grind in. Rubber and vinyl mats rinse with a hose and a little soap, while deep-tray liners just come out and get dumped. Custom carpet should be vacuumed often and spot-cleaned before stains set. Take the mats out after muddy or beach trips so moisture does not sit on the carpet underneath, and inspect the retention hooks once in a while, since heat makes old plastic brittle. That routine keeps the mats flat, the carpet dry and the cab smelling clean.
- Hose rubber and vinyl; dump tray liners
- Vacuum carpet mats and spot-clean early
- Remove mats after mud or beach days
- Check hooks before heat makes them brittle
What to check before you buy mats
The difference between a mat that lasts and one that slides is in the details. Confirm the set covers the full floor, including the dead pedal and under the seats, and that it uses the factory retention hooks rather than friction alone. Ask whether the material is meant for mud and water or for looks, and whether the tray edges are tall enough for the spills you actually have. A mat cut for your cab and console fits flat and stays put; a universal one that looks close will leave the edges exposed, which is where carpet damage always starts.
Recently fitted
Questions from the counter
Are custom floor mats worth it over universal ones?
Yes for most trucks. Custom mats cover the full floor, hook into factory anchors and stay put, so they protect the carpet where universal mats leave gaps and slide.
Do floor mats fit specific cabs and consoles?
They do, which is why we match the set to your cab and console. A crew cab with a full console takes a different cut than a regular cab with a bench seat, so send your details before ordering.
Rubber or carpet floor mats — which is better?
Rubber wins for mud, water and work boots because you just hose it off. Carpet looks more factory and quiets the cab but needs vacuuming and spot cleaning, so pick by the mess you make.
Can floor mats be trimmed to fit?
Some mats have trim lines for minor adjustment, but the best fit comes from the right molded set for your truck. Trimming universal mats is exactly what leaves the edges exposed and lets grit grind in.
How much do custom floor mats cost?
As a range, all-weather rubber sets run $80–$180, custom carpet sets $100–$220, deep-tray liners $120–$260 and fleet vinyl mats $60–$150, with the exact price varying by year, make, trim and how many rows you cover.
Are deep-tray liners better than flat mats?
Deep-tray liners hold more liquid and are great for families, pets and wet climates. Flat rubber mats are easier to remove and cheaper, so choose trays if spills are your problem and flats if it is mostly dust and mud.
Will floor mats void my warranty?
No. Floor mats are a bolt-in accessory that does not modify the truck, and properly fitted mats with retention hooks are what the factory expects to work with its anchors.
Do you install floor mats or just sell them?
We do both. We can fit them in minutes so the hooks seat right and the tray edges tuck under the trim, or sell you the correct set to install yourself.
How do I clean the worst muddy floor mats?
Take them out, knock off the dry mud, then hose and scrub with mild soap and let them dry fully before reinstalling. Never leave damp mats sitting on carpet, since trapped moisture is what causes odor and rust.
Why RGV Truck Accessories
- Each part is matched to your exact year, cab and bed length before we order it.
- Covers, liners, rails, shells, mats, lights and armor all under one roof.
- Mounting sealed and torqued so nothing whistles, leaks or rattles loose.
- A parts counter up front with a full install bay behind it.
Start a quote
Tell us the truck and what you need. We reply with a written price for parts and labor.