Custom Fabrication
One-off welding and metalwork: custom bumpers, headache racks, bed racks and repairs built to your exact truck.
Custom Fabrication at a glance
- Types
- Racks · bumpers · brackets
- Materials
- Steel, aluminum, stainless, DOM
- Cost range
- $100–$2,500
- Fitment
- Built to your truck
Custom fabrication for your truck
Custom fabrication is the work that no catalog part can do: a rack built to clear your particular headache rack, a bumper shaped around your winch and lights, or a repair that saves a part nobody makes anymore. Our shop measures, cuts, welds and finishes steel and aluminum to fit your truck exactly, whether that is a one-off hunting rack, a fleet of identical bed racks or a fix for a damaged bracket. If off-the-shelf does not fit your year, your bed or your job, custom fabrication is how we build the part that finally does.
- Custom racks, bumpers, mounts and brackets
- Steel and aluminum welded and finished here
- One-offs, small runs and fleet batches
When custom beats off-the-shelf
Off-the-shelf is faster and often cheaper, and for common trucks it fits fine. Custom wins when your truck is unusual, when two accessories fight for the same space, or when the job has a requirement no product covers. Maybe your headache rack rubs a camper shell, or your tool boxes need a rack built around them, or your fleet wants fifteen identical racks that mount to a specific bed. Custom also makes sense for repairs, where a small fabricated bracket can save an expensive assembly instead of replacing the whole thing.
Fabrication materials compared
The material and finish you choose decide weight, strength and how the part survives Valley weather. Steel is strong and easy to repair, aluminum saves weight, and the finish determines whether it rusts or keeps its color. Pick for the job and for how the truck is stored.
| Material | Weight | Best for | Finish options |
|---|---|---|---|
| Mild steel | Heavy | Bumpers, racks and structural parts | Powder coat, paint, bedliner coat |
| Aluminum | Light | Weight-sensitive racks and panels | Powder coat, anodize, raw |
| Stainless | Heavy, costly | Details and corrosion-prone spots | Polished, brushed |
| DOM tubing | Moderate | Sliders, cages and recovery points | Powder coat, paint |
Racks, bumpers and one-off builds
Some of the most common custom jobs are headache racks that protect the cab and hold ladders, bed racks for work and camping, winch bumpers shaped to a specific truck, and mounts for lights, jacks or tanks. We also build the small parts that make a bigger build work: brackets, spacers, tabs and reinforcement plates. Whatever the project, the process starts with your use and your truck, and we design the part around both rather than trimming a generic product until it sort of fits.
Fitment and measuring your build
Custom fitment starts with the truck in front of us or careful measurements from you. We check the bed, frame, bumper, existing accessories and anything the new part must clear, then account for lift, tires and how the load will move. Because the part is built to the truck, we control every gap and mounting point, which is exactly why a custom build can fit where a universal one cannot. If you are not local, photos with a tape measure and your model details are usually enough to get a quote and a plan going.
- Truck measured for bed, frame and clearance
- Lift, tires and existing accessories accounted for
- Every gap and mount controlled by the design
- Remote builds quoted from photos and dimensions
What custom fabrication costs
Custom pricing depends on material, design time, finish and how complex the piece is, and it moves with the truck and the batch size. As a working range, a simple custom rack commonly runs $400–$1,200, a custom bumper $800–$2,500, small brackets and repairs $100–$400, and a fleet batch is quoted per unit once the design is set. Count these as ranges, not quotes: the price tracks the year, make and trim, by material and finish, and by how much design work the build needs.
- Simple custom rack: typically
- $400–$1,200
- Custom bumper: typically
- $800–$2,500
- Brackets and small repairs: typically
- $100–$400
- Fleet batches: quoted per unit after design
How a custom build runs
A custom job moves in stages so nothing is guessed. We talk through the use, measure the truck, sketch or model the part and confirm the design with you before cutting metal. Then we cut, fit, weld and test-fit the piece, adjust for clearance and strength, and finish it in powder coat, paint or a durable coating. Once it is mounted and torqued, we do a final walk-around to confirm the fit and that nothing rubs or interferes. You see the plan before the welding starts, so there are no surprises at pickup.
-
Design confirmed with you before any cutting
-
Cut, fit, weld and test-fit on the truck
-
Adjust for clearance, then finish and coat
-
Final walk-around before you take it home
Care and finish lifespan
A well-built custom part lasts as long as the truck if the finish is protected. Powder coat is tough but chips on hard hits, so touch up any exposed steel before rust can start, especially after off-road trips or beach runs where salt and grit get into scratches. Wash off Valley dust and chemical residue, and check welds and fasteners once a season for stress cracks or loosening. Anodized and polished aluminum needs rinsing and occasional polish, while coated steel mostly just needs the chips watched.
- Touch up coating chips before rust starts
- Wash off salt, dust and chemical residue
- Check welds and fasteners each season
- Polish aluminum, watch chips on steel
Repairs and small fabrication jobs
Custom fabrication is not only big builds. A lot of what we do is repair and reinforcement: a cracked bracket, a bent mount, a broken step or a hole that needs a proper patch. A small fabricated piece often saves an expensive assembly or keeps a work truck on the road instead of ordering a part with a long lead time. Bring us the broken piece or a photo, and we can usually tell you whether a repair, a reinforcement or a replacement makes the most sense for your budget and your timeline.
Recently fitted
Questions from the counter
What kinds of custom fabrication do you do?
We build and repair headache racks, bed racks, winch bumpers, light mounts, brackets, tabs and reinforcement plates in steel and aluminum, plus small structural repairs that keep a work truck going.
Is custom fabrication worth it over a bolt-on part?
For common trucks a bolt-on usually fits fine and costs less. Custom wins when your truck is unusual, when two accessories conflict, or when the job needs a requirement no catalog part covers.
Can you build a one-off part from photos?
Often yes. For non-local customers, photos with a tape measure plus your year, make, model and bed details are usually enough to quote and plan a build before we ever see the truck.
How long does a custom build take?
Simple racks and brackets can be done in days, while full bumpers and complex builds take longer because of design, fitting and finish. We give you a timeline with the quote so you can plan around it.
How much does custom fabrication cost?
As a range, a simple custom rack runs $400–$1,200, a custom bumper $800–$2,500 and small brackets or repairs $100–$400, with the price varying by year, make, trim, material, finish and design time.
What finish should I choose for a fabricated part?
Powder coat is the durable default for steel, paint is easy to touch up, and aluminum can be powder coated or anodized. In our sun and salt air, a good finish matters as much as the welding itself.
Can you match a fleet of trucks with identical racks?
Yes. Once the design is set for one bed, we build a batch to the same standard so every unit mounts identically. That simplifies installs and makes replacements simple later.
Will a custom part void my warranty?
A part that bolts to existing points without cutting or modifying the factory structure generally will not. We design to mount cleanly and avoid altering load-bearing factory parts where we can.
Do you repair cracked or bent metal parts?
Yes. Small fabrication repairs are a large share of our work, from cracked brackets to bent mounts and steps. Bring the part or a photo and we advise whether to repair, reinforce or replace.
Why RGV Truck Accessories
- Each part is matched to your exact year, cab and bed length before we order it.
- Covers, liners, rails, shells, mats, lights and armor all under one roof.
- Mounting sealed and torqued so nothing whistles, leaks or rattles loose.
- A parts counter up front with a full install bay behind it.
Start a quote
Tell us the truck and what you need. We reply with a written price for parts and labor.